 
|
|
|
||||
|
Some lighting might have been provided by light fixtures at switched wall outlets. The function of some switches might not have been determined due to furnishings, missing or burned out light bulbs, switched wall outlets that were blocked, or other conditions.
Determining whether or not a dimmer switch is properly matched to the lighting fixture being dimmed is beyond the scope of the home inspection. If you have any concerns, or if you notice flickering or brownouts at dimmed lighting fixtures, consult with a licensed electrician. Some manufacturers require clearance in the attic around their recessed lighting fixtures for proper ventilation and operation. Inadequate clearance can create a fire hazard due to overheating of the light fixture. Clearance requirements typically are located on a paper plate attached to the fixture or in the manufacturer’s installation instructions. |
We look for recessed lighting fixtures and clearance and will note any lack of clearance; we will not read paper plates or installation instructions to determine what type of clearance or how much clearance is required by specific brands of recessed lights. If Section 4 – Areas of Concern notes inadequate clearance around recessed lights, you should have the condition evaluated further by qualified lighting or electrical personnel, or by the manufacturer’s representative.
Recommend ensuring clearance around attic fixtures to help prevent overheating in absence of manufacturer’s installation instructions. Recommend having attic inspected immediately after any service work has been done in the attic. |
|
||
 
|
||||
